[Scilab-users] Cblock -Not working with other Xcos blocks

classic Classic list List threaded Threaded
1 message Options
nic nic
Reply | Threaded
Open this post in threaded view
|

[Scilab-users] Cblock -Not working with other Xcos blocks

Hi, I found that C_blocks in Xcos change their behavior when certain other
Xcos blocks are added to the simulation. This simulation below has defined 3
c_blocks. It produces the outputs as expected. Note that I added a sine wave
to each c_block , because I discovered C-blocks do not get called if the
inputs do not change.

<http://mailinglists.scilab.org/file/t498071/accel1.png>

However, when a simple transfer function is added to the simulation as in
the next diagram. The behavior of the c-blocks change and it does not
produces the same output. Is it OK to mix c-blocks and other Xcos blocks in
a simulation ? What is the reason for this behavior and how can it be fixed.
Any help will be appreciated.

<http://mailinglists.scilab.org/file/t498071/accel2.png>


Regards




--
Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
_______________________________________________
users mailing list
[hidden email]
http://lists.scilab.org/mailman/listinfo/users