[Scilab-users] Cblock -Not working with other Xcos blocks

classic Classic list List threaded Threaded
1 message Options
nic nic
Reply | Threaded
Open this post in threaded view
|

[Scilab-users] Cblock -Not working with other Xcos blocks

Hi,
I want to test some existing C code in a Xcos simulation as in this Xcos
diagram
<http://mailinglists.scilab.org/file/t498071/accel2.png>

The c_blocks produce the expected output without the first order continuous
transfer function. Without the transfer function block, this is the output.
<http://mailinglists.scilab.org/file/t498071/out1.png>

And with the added transfer function the output of the last c_block changes
to
<http://mailinglists.scilab.org/file/t498071/out2.png>

I added the signals , since the characteristics of the signal may have
bearing on the problem.
My question is: why does the c_block output change when the continuous
element is added ? Does it change the solver ? And most important: can
c_blocks be mixed with other Xcos elements ?

Any help will be much appreciated
Regards



--
Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
_______________________________________________
users mailing list
[hidden email]
http://lists.scilab.org/mailman/listinfo/users